The Rear Ports - Billion BiPAC 7700N User Manual

The Rear Ports

Port
1 Wireless Antenna
2 Power
3 Switch
4 WPS
5 Wireless ON/OFF
6 Ethernet
7 DSL
Reset(At the bottom
8
of the device )
Wireless antennas.
Connect it with the supplied power adapter.
Power ON/OFF switch.
Push WPS button to trigger Wi-Fi Protected Setup function.
For WPS configuration detail, please refer to
section of this User Manual.
Press to enable wireless when wireless is disabled and the
WLAN LED lit.
Press to disable wireless when wireless is on and the WLAN
LED will be OFF.
Connect your computer to a LAN port using the included
Ethernet cable (with RJ-45 cable)
Connect the supplied RJ-11 cable to this port when
connecting to the ADSL/telephone network.
Press for more than 5 seconds to restore the device to its
factory default mode.
10
Meaning
WPS Setup