Billion BiPAC 7700N User Manual page 5

VPI/VCI 8/35, you can set the PPPoE, IPoE, and Bridge connection via the PVC without
respectively assigning the three services to three different PVCs.
Virtual AP
A "Virtual Access Point" is a logical entity that exists within a physical Access Point (AP). When a
single physical AP supports multiple "Virtual APs", each Virtual AP appears to stations (STAs) to be
an independent physical AP, even though only a single physical AP is present. For example,
multiple Virtual APs might exist within a single physical AP, each advertising a distinct SSID and
capability set. Alternatively, multiple Virtual APs might advertise the same SSID but a different
capability set – allowing access to be provided via Web Portal, WEP, and WPA simultaneously.
Where APs are shared by multiple providers, Virtual APs provide each provider with separate
authentication and accounting data for their users, as well as diagnostic information, without
sharing sensitive management traffic or data between providers. You can enable the virtual AP.
Web Based GUI
It supports web based GUI for configuration and management. It is user-friendly and comes with
online help. It also supports remote management capability for remote users to configure and
manage this product.
Firmware Upgradeable
Device can be upgraded to the latest firmware through the WEB based GUI.
2