Billion BiPAC 7700N User Manual page 145

Bridge Restrict: this feature determines whether the gateway will communicate with all other
bridges or only specific ones:
Enable: to enable wireless bridge restriction. Only those specified in the Remote MAC
Address the gateway can communicate with.
Remote Bridge MAC Address: enter the remote bridge MAC addresses. Here up to 4 bridge
MAC addresses are supported.
Enabled (Scan): to enable wireless bridge restriction. Only those been scanned the gateway
can communicate with.
Remote Bridge MAC Address: select the remote bridge MAC addresses.
Disable: Does not restrict the gateway to communicating with bridges that have their MAC
address listed, but it is still open to communicate with all bridges that are in the same network.
Click Apply/Save to apply your settings.
142