Route
Destination: the IP address of destination network.
Gateway: the IP address of the gateway this route uses.
Subnet Mask: the destination subnet mask.
Flag: show the status of the route.
U: show the route is activated or enabled.
H (host): destination is host not the subnet.
G: show that the outside gateway is needed to forward packets in this route.
R: show that the route is reinstated from dynamic routing.
D: show that the route is dynamically installed by daemon or redirecting.
M: show the route is modified from routing daemon or redirect.
Metric: Display the number of hops counted as the Metric of the route.
Service: Display the service that this route uses.
Interface: Display the existing interface this route uses.
39