Basic - Billion BiPAC 7700N User Manual

Basic

It let you determine whether to enable Wireless function and set the basic parameters of an AP and
the Virtual APs.
Enable Wireless: Default setting is set to Enable. If you do not have any wireless devices, check
the checkbox again to unselect.
Hide Access Point: It is function in which transmits its SSID to the air so that when wireless client
searches for a network, router can then be discovered and recognized. Check the checkbox to
determine whether you want to hide SSID.
Clients Isolation: if you enabled this function, then each of your wireless clients will not be
communicate with each other.
Wireless multicast Forwarding (WMF): check to enable or disable wireless multicast forwarding.
SSID: The SSID is the unique name of a wireless access point (AP) to be distinguished from another.
For security purpose, change the default wlan-ap to a unique ID name to the AP already built-in to
the router's wireless interface. It is case sensitive and must not excess 32 characters. Make sure
your wireless clients have exactly the SSID as the device, in order to get connected to your network.
Note: SSID is case sensitive and must not excess 32 characters.
BSSID: Basic Set Service Identifier, it is a local managed IEEE MAC address, and is 48 bits value.
122