Billion BiPAC 7700N User Manual page 63

VLAN MUX Connection Mode
It is similar to Default Connection in configuration. Select the interface which is a VLAN MUX mode
connection configured in WAN Service, here for example, in the following, atm1/(0_1_35) is a VLAN
MUX mode connection.
select interface(VLAN MUX mode).
Click Next to go on to next step.
Select WAN service type: select the protocol, PPPoE, IP over Internet, Bridge.
Enter Service Description: user-defined description.
Enter 802.1P Priority: It indicates the frame priority level from 0 (lowest) to 7 (highest), which can
60