Billion BiPAC 7700N User Manual page 64

be used to prioritize different classes of traffic (voice, video, data, etc). Enter the priority identification,
tagged:0-7, untagged:-1.
Enter 802.1Q VLAN ID: It is a parameter to specify the VLAN which the frame belongs. Enter the
VLAN ID identification, tagged: 0-4094, untagged:-1.
You can leave 802.1P Priority and 802.1Q VLAN ID as default setting,-1, means untagged, in this
mode, the vlan tag header will not be contained, but if you want to allow one service for the specific
vlan, here you should set the two parameters, the vlan tag header will be contained.
The following steps are similar to Default Connection settings, for help turn to Default Connection
settings.
Take an example, let's look at a scenario in which 1 PPPoE and 1 Bridge service needed by user.
In the above page, click Next to set WAN service parameters.
61