Set up a QoS Classification
IP QoS
LAN to WAN
IP QoS
1. It is a QoS controlling the traffic from LAN to WAN. So first make sure there is at least one WAN
queue. If you have configured WAN interface and it will appeared as a default queue, you can also
add other queues of the specific interface. See Queue Config.
Here we have a atm0 (WAN interface), the interface has a default queue and an added queue. Make
sure to enable the queue.
2. In QoS Classification Setup page, Click Add to add a Qos Classification.
Then in the appeared Add Network Traffic Class Rule page, enter the information to set up a rule.
1) Specify the rule name, rule order, and rule status.
94