Factory Default Settings - Billion BiPAC 7700N User Manual

Factory Default Settings

Before configuring your router, you need to know the following default settings.
Web Interface (Username and Password)
Three user accounts are provided by this router, admin, support and user respectively. See
Control.
Admin: the one who has unrestricted access to change and view configuration of your Broadband
Router.
Username: admin
Password: admin
Support (Remote): is used to allow an ISP technician to access your Broadband Router for
maintenance and to run diagnostics.
Username: support
Password: support
User (local): the local user who can access the Broadband Router, view configuration settings
and statistics, as well as, update the router's software.
Username: user
Password: user
Device LAN IPv4 settings
IPv4 Address: 192.168.1.254
Subnet Mask: 255.255.255.0
DHCP server for IPv4
DHCP server is enabled.
Start IP Address: 192.168.1.1
IP pool counts: 20
22
Access