For more detailed instructions on configuring and using the Billion VoIP/(802.11g) ADSL2+ (VPN) Firewall Router, please refer to the on-line manual. Package Contents VoIP/(802.11g) ADSL2+ (VPN) Firewall Router CD-ROM containing the online manual RJ-11 ADSL/telephone Cable Ethernet (CAT-5 LAN) Cable...
Quick Start Guide The Front LEDs LAN Port 3 – 6 — (RJ-45 connector) WLAN (Wireless Router only) Phone 8 – 9 — (RJ-11 connector) LINE (Router with LINE port only) VoIP Port — (RJ-11 connector) ADSL/PPP Meaning Lit when power is ON. Lit when the system is ready.
The Rear Ports The LAN 4 can be connected to the computer and console cable. You need a special console kit in this package to connect the LAN cable of Port 4 when connecting to a PC’s RS-232 port (9-pin serial port). Port Power Switch RESET...
Quick Start Guide Connecting Your ADSL Router 1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone (ADSL) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit. 4.
Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties.
Quick Start Guide Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4.
Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3.
Page 10
Quick Start Guide Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK.
Page 11
Configuring Your ADSL Router To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed Verifying Your Local Network Connection with the Device To see if this ADSL Router is visible on the local network, go to Start / Run.
Quick Start Guide Connecting to the Router Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for this router. Press Enter. 2. A username and password window will appear. The default username and password are admin and admin.
Need help?
Do you have a question about the BiPAC 7404V series and is the answer not in the manual?
Questions and answers