Queue Config - Billion BiPAC 7700N User Manual

Queue Config

Queue is a technology of managing congestion providing precautions with the packets storing and
scheduling. Queue Config allows you to configure a QoS queue entry and assign it to a specific
network interface. Each queue entry set here will be used by the classfier to place ingress packets
appropriately.
Note:
the interface set in the LAN2 Interface> ATM Interface will be list as Default Queue here,
and the parameters listed above can be configured there. For detail, please turn to LAN2 Interface>
ATM Interface section for help. You can also add other queues to the ATM interfaces despite of the
default queue.
Name: the queue name.
Key: the item number.
Interface: the queue interface.
Scheduler Algorithm: the QoS Scheduler Algorithm, SP(Strict Priority) or WFQ(Weight Fair
Queuing)
Precedence: the priority identification.
Weight: the weight value, 1-63. the highest is 63.
PTM Priority: the PTM priority, normal or high.
Enable: check the enable check-box, then press Enable to activate the queue. If you want to
disable this queue, you can uncheck the corresponding check-box and press Enable, the queue will
be disabled.
If the queue is enabled, you will see a tick, like . Otherwise, the queue is disabled.
Click Add to create a queue.
89