Billion BiPAC 7700N User Manual page 98

2) Specify the classification criteria. Here you can set every parameter to strictly control the specific
traffic or you can set several parameters to let them be the key elements to control the traffic. A
blank criterion indicates it is not used for classification.
3) Specify the classification results. Here you must Assign Classification Queue. Whether the
following parameters are needed is according to your needs. If you do not want to change the
original information, please leave it empty. The queues listed here in the Assign Classification
Queue are WAN interface queues set in Queue Config section. Select the needed queue. If you find
none queues here, turn back to check whether you have configured a queue and enable it.
3. Click Apply/Save to save your settings. The added rule will listed as below.
Enable: check the enable check-box, then press Enable to activate the rule. If you want to disable
this rule, you can uncheck the corresponding check-box and press Enable button, the rule will be
disabled.
Remove: To delete the QoS class from the table, check Remove checkbox then click Remove
button to delete the selected item.
95