Billion BiPAC 7402R2 ADSL2+ VPN Firewall Router For more detailed instructions on configuring and using the ADSL2+ VPN Firewall Router, please refer to the on- line manual. Package Contents BiPAC 7402R2 ADSL2+ VPN Firewall Router CD-ROM containing the online manual...
Quick Start Guide The Front LEDs Meaning Lit steady when there is a PPPoA / PPPoE connection. PPP / MAIL Lit and flashed periodically when there is email in the Inbox. When lit, it indicates that the ADSL (Line) port is connected to the DSLAM ADSL and working properly.
Billion BiPAC 7402R2 ADSL2+ VPN Firewall Router The Rear Ports Port Meaning Power Switch Power ON/OFF switch Connect the supplied power adapter to this jack. After the device is powered on, press it to reset the device or restore to factory default settings.
Quick Start Guide Connecting Your ADSL Router 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.
Billion BiPAC 7402R2 ADSL2+ VPN Firewall Router Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties.
Quick Start Guide Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties.
Billion BiPAC 7402R2 ADSL2+ VPN Firewall Router Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC.
Page 10
Quick Start Guide Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK.
Billion BiPAC 7402R2 ADSL2+ VPN Firewall Router Configuring Your ADSL2+ VPN Firewall Router To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed Connecting to the Router Open the web browser and type http://192.168.1.254 in the browser’s address box.
Page 12
Quick Start Guide At the main menu screen, the left navigation panel where bookmarks are provided links you directly to the desired setup page, including: Status (ARP Table, Routing Table, DHCP Table, PPTP Status, IPSec Status, L2TP Status, Email Status, Event Log, Error Log, NAT Sessions and UPnP Portmap) Quick Start Configuration (LAN, WAN, System, Firewall, VPN, QoS, Virtual Server, Time Schedule and Advanced)
Need help?
Do you have a question about the BiPAC 7402R2 and is the answer not in the manual?
Questions and answers