Size; Installation; Configuration; Phone Keypad Set - ATCOM AT-323 User Manual

ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
Size£ º
198 x 176 x 60 mm (L x W x H)

Installation:

1£ ® Connect handset to base: insert handset cord into handset cord jack
at the left side of the base.
Connect IP phone to Internet: plug the RJ-45 Ethernet cable into the
2£ ®
Ethernet Jack. Plug the other end of the cable into HUB.
3£ ® Power on IP phone: p
plug the other end of the power cord adapter into the appropriate wall
outlet.

Configuration

Four different ways can be used to configure ATCOM IP phone: phone
keypad set; web browser, Telnet commands and PalmTool configuration on
computer.
Phone Keypad se
● Function Keys Introduction: While using keypad and LCD to configure
the setting of IP phone, following keys will be used:
Keys
LocaIP Enter change mode
Turn
Vol£ «
backward
Keypads Modify values
● Configuration operation: We tack enabling eTalk prepaid card and
setting the ID and pin as an example to explain how to change
Shenzhen ATCOM Co., Ltd.
lug the power cord adapter into the Power Jack. Then
Function
over menu
Keys
Speaker Enter submenu; confirm change
Turn over menu forward; move
Vol -
cursor back in change mode
Exit current menu; exit change
Redial
mode
Function
7