ATCOM AT-323 User Manual page 20

ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
● call type: Set call type by selecting the items in drop down list.
normal: Call out in normal way by selecting this item.
faststart: Call out in faststart way by selecting this item.
advanced: Call out in faststart and tunneling way by selecting
this item. It is a recommended way with H323 protocol used.
special 1: When IP phone calls Huawei 8010 gateway, please select
this item.
pecial 2: When IP phone calls Lihua gateway, please select this
item.
● dtmf: Set DTMF signal sending way by selecting control string, inband
audio, signal keypad or rfc 2833 from dropdown list.
● calling card: Set prepaid card to call PSTN phone by selecting
corresponding item in dropdown list.
disable: Do not use any prepaid card by selecting this item.
mediaring: Use Mediaring prepaid card by selecting this item.
etalk: Use eTalk prepaid card by selecting this item. With eTalk
selected here, please select dialnum in dial plan drop down list
and then fill 00 into dial number field.
Note When eTalk card is used, besides above configuration, please set other
parameters as follows: service addr: 202.91.230.91; service id: ETNSGK;
account: 0117ETNS.If IP phone can not log in 202.91.230.91,please try to
use 202.91.230.93. And if IP address of the phone is a private one, please do
Shenzhen ATCOM Co., Ltd. 20