ATCOM AT-323 User Manual page 36

ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
protocol used, use this value to fit into the GnuGK system
transferring the voice and signal by router; 3: use this value
with Auvtech private system used; 4: stun. Use this value with
SIP protocol used according to requirement of system; 5: use
this value with vida private system used.
set proxyip XX.XXX.X.XX
According to system, set IP address of proxy.
set service X
According to different protocol, set use protocol service or
not. X ranged from 0 through 1. 0: do not use service; 1: use
service.
set serviceid XXXXX
Set service ID according to required by service system.
set serviceaddr XXXX
According to protocol used, set IP address or domain name of
log in server. With H323 protocol used, set IP address or domain
name of gatekeeper; With MGCP protocol used, set IP address
or domain name of Call Agent; With SIP protocol used, set IP
address or domain name of SIP Proxy Server; With Net2phone
protocol used, set IP address or domain name of designated
server.
Note With H323 protocol used, if value of set service is 0, then set serviceaddr
command can be used to set IP address of gateway.
set serviceport XXX
Set the monitor port of service. With H323 protocol, if GK is
Shenzhen ATCOM Co., Ltd. 36