ATCOM AT-323 User Manual page 49

ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
Then input the phone number you wish to call and press
to end the dialing. Once the call connection has been established
and the ring tone has sounded, wait for the other party to answer.
When the other party answers, you can begin speaking. When the call
is over, Press
into the buffer.
3. Blind dialing: Use the keypad to enter the phone number you wish
to call and then press
call connection has been established and the ring tone has sounded,
wait for the other party to answer. When the other party answers,
you can begin speaking. When the call is over, Press
The dialed number has been saved into the buffer.
● Place a call without login the Gatekeeper
If ATCOM IP phone does not login the Gatekeeper, you can place a
call by lifting the handset or pressing
the IP address of the other party, and then pressing
● Place a call through Gateway
If ATCOM IP phone does not login the Gatekeeper, you can place a call
through Gateway directly by lifting the handset or pressing
and then inputting the IP address of the other party, and then pressing
or
Cal
Note When you place a call without Gatekeeper or with Gateway, please log off
Shenzhen ATCOM Co., Ltd.
again. The dialed number has been saved
Speaker
Cal
.
£ £
or to make the call. Once the
Speaker
or
Cal
again.
Speaker
and then inputting
or
Cal
49
£ £
£ £
£ £