ATCOM AT-323 User Manual page 38

ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
Set call type of the phone. X is ranged from 0 through 4: 0:
call out in normal way; 1: call out in faststart way; 2: call
out in faststart and tunneling way. It is a recommended way
with H323 protocol used; 3: when IP phone calls Huawei 8010
gateway, use this value; 4: when IP phone calls Litai gateway,
use this value.
set localtype X
With H323 protocol used, this command used to set how IP phone
log in gatekeeper. X is ranged from 0 through 4: 0: use phone
number as E.164 and H323 ID to login the GK; 1: use phone number
as E.164 and designated H323 ID by set account XXX command;
2: use phone number as E.164 and MAC address of IP phone as
H323 ID to login GK; 3: md5 account, with encryption being
supported by GK, set value as 3; 4: cat account, with cat
authentication being supported, set value as 4.
set dtmf X
Set DTMF relay type. X is ranged form 0 through 3: 0:control
string£ » 1:inband audio£ » 2: signal keypad£ » 3:rfc 2833.
set prepaid X
Enable/disable the repaid and choose the repaid server
provider. Parameter x ranged from 0 through 8: 0: disable
repaid card; 1: use Mediaring service; 2: use eTalk card; 3:
use Auvtech service; 4: use Subcentrex service; 5: use Ringtec
Shenzhen ATCOM Co., Ltd. 38