ATCOM AT-323 User Manual page 26

ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
● audio type: Set audio type of the phone by selecting item from drop
down list. The options are g.711u £ ¬
g.729a ,g.729b andg.729ab.
● audio frame: Set audio frames in RTP package. With G723 audio codec
used, set it as 1; with G729 audio codes used, set it as 2.
● g.723.1 high rate: With g.723.1 selected in audio type dropdown list,
enable/disable g.723.1 high rate by checking/ unchecking this
option.
● vad: Enable/disable VAD (voice activity detection) by checking/
unchecking this box.
● agc: Enable/disable AGC by checking/unchecking this box.
● aec: Enable/disable VEC by checking/unchecking this box.
● handset in: Drag the slider to adjust the volume of handset input.
Drag it to the left to reduce the volume; while drag it to the right
to increase the volume.
● handset out: Drag the slider to adjust the volume of handset output.
Drag it to the left to reduce the volume; while drag it to the right
to increase the volume.
● speaker out: Drag the slider to adjust the volume of handfree output.
Drag it to the left to reduce the volume; while drag it to the right
to increase the volume.
Other settings:
Shenzhen ATCOM Co., Ltd.
Fig 3.5 Audio Setting Page
g.711a £ ¬ g.723.1 £ ¬ g.729 £ ¬
26