ATCOM AT-323 User Manual page 39

ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
service; 6: use Smartcon service; 7: use dda service; 8: use
vida service.
set account XXXXXX
With H323 protocol used, while calling card is set, set account
of chosen card; while local type is set as 3[md5 accoutn]
or4[cat account] , set ID; while set localtype is set as 1,
set H323 ID. With MGCP protocol used, please set local name
by this command. With Net2phone system used, set account of
Net2phone card by this command.
set pin XXXXXXXXXX
With H323 protocol used, while calling card is set, set
password of chosen card; while local type is set as 3[md5
accoutn] or 4[cat account] , set password. With MGCP protocol
used, please set domain name by this command. With Net2phone
system used, set password of Net2phone card by this command.
set phonenumber XXXXXXXX
Set a number of ATCOM IP phone according to systems. Value
xxxxx must be an Arabic numeral and no longer than 16
characters.
set fwdnumber XXXXXXX
Set receiving forwarded calls phone number. XXXX must be an
Arabic numeral and no longer than 16 characters
Shenzhen ATCOM Co., Ltd. 39