ATCOM AT-323 User Manual page 37

ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
used, please set it as 1719; if GK is not used, please set it
as 1720; with MGCP protocol is used, please set it as 2727£ »
with SIPP protocol is used, please set it as 5060; With
Net2phone is selected, please set it as 6801 or 7000.
set rtptos X
Set TOS segment of IP head package in RTP digital follow.
set rtpport XXXX
RTP port is the port transferring and receiving voice flow
using UDP protocol. XXXX is ranged from 1024 through 65535.
set registerport XXXX
Set register port. According to used protocol, set as follows:
With H323 protocol used, XXXX is ranged from 1024 through 6553;
With MGCP protocol used, please set is as 2427; With SIP
protocol used, please set it as 5060; With Net2phone protocol
used, this port could be any number.
set signalport XXXX
With H323 protocol used, signal port is Q.931 port using TCP
protocol. XXXX is arranged from 1024 through 65535.
set controlport XXXX
Set control port. With H323 protocol used, this port is H.245
port using TCP protocol. XXXX is ranged from 1024 through
65535.
set calltype X
Shenzhen ATCOM Co., Ltd. 37