ATCOM AT-323 User Manual page 40

ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
set fwdpoweroff X
Enable/disable forward calls if power off. X is ranged from
0 through 1. 0: do not forward calls if power off; 1: forward
call if power off.
set fwdalways X
Enable/disable
1. 0: do not forward all calls; 1: forward all calls.
set fwdbusy X
Enable/disable
through 1. 0: do not forward calls if busy; 1: forward call
if busy.
set fwdnoanswer X
Enable/disable forward calls without replying. X is ranged
from 0 through 1. 0: do not forward calls without replying;
1: forward call without replying.
set dialplan X
Enable/disable dial plan and dial number. Parameter X ranged
from 0 through 3: 0: disable dial plan; 1: enable dial plan;
2: use dial number; 3: use 179XX service.
set dialnumber XX
When set dialplan value set as 2, please use this command to
set dial number. For example, with eTalk card used, please set
Shenzhen ATCOM Co., Ltd.
forward all calls. X is ranged from 0 through
forward calls if busy. X is ranged from 0
40