ATCOM AT-323 User Manual page 33

ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
Password:****
P:\>get
iptype 0[static]
ip 192.168.1.178
dns 202.106.196.152
account [empty]
pin [empty]
fwdpoweroff 0[disable]
fwdalways 0[disable]
ringtype 12[user define]
handsetin 8
password 1234
upgradeaddr [empty]
ntsip 210.59.157.10
timezone 20[(GMT-03:00)Greenland]
set
Command
Syntax description: set keywords value
Usage: Used to configure password and other running parameters of
ATCOM IP phone.
Detailed description:
set iptype X
Set how IP phone gets relevant network parameters. X ranged
from 0 through 3: 0: authorize users set IP address, subnet
mask and router IP address of IP phone manually; 1: use DHCP
mode. With this system, your LAN or router automatically
assigns all the required network parameters to any device
connected to it when the device log on. ATCOM IP phone is
shipped from the factory with DHCP on. So, if your LAN or router
is configured to use DHCP addressing, the IP phone¡ ¯ s LAN
Shenzhen ATCOM Co., Ltd.
subnetmask 255.255.255.0
dns2 202.106.196.115
fwdbusy 0[disable]
handsetout 12
daylight 0[disable]
router 192.168.1.254
fwdnoanswer 0[disable]
answer 0
speakerout 11
33