ATCOM AT-323 User Manual page 23

ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
● use dialplan: Set whether use dial plan or use dial number by
selecting the corresponding item in drop down list.
disable: Do not use dial plan or dial number by selecting this
item.
enable: Use dial plan by selecting this item.
dialnum: Use dial number by selecting this item. With this item
selected, please enter the dial prefix into dial number field.Rtp
port: Enter an even number from 1024 through 65535 into this field
to designate the PTP port of H.323 protocol.
prefix: Use 179XX service by selecting this item.
Note With 179xx service used, please set as follows: fill call prefix into dial number
field, such as 17930; type ;language indicating number, card number and # into
account field; fill password and # into pin field.
● dial number: With dialnum selected in use dialplan drop down list,
please enter the dial prefix into this field according to
requirement of log in server. For example, with eTalk card used,
enter 00 here.
● ddd code: With enable or dialnum selected in use dialplan drop down
list, set area code according to E.164 dial rule. For example,
Beiing 10; Shanghai 21.
● idd code: With enable or dialnum selected in use dialplan drop down
list, set country code according to E.164 dial rule. For example,
Shenzhen ATCOM Co., Ltd. 23