Chapter 1 2 Dvr Management; Managing System; Upgrading The System Firmware - HIKVISION DS-9600-ST Series User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User's Manual
C H A P T E R 1 2
DVR Management

Managing System

Upgrading the System Firmware

The system firmware for your DVR can be updated from a USB storage device or FTP.
To update the system firmware from a USB storage device:
1. Enter the Upgrade menu by going to Menu > Maintenance > Upgrade.
2. Select the Local Upgrade tab, as shown in Figure 212.
3. Connect the USB storage device to a USB port on the DVR.
4. Click the Refresh button. The contents of the USB storage device will be shown on the
screen.
5. Select the firmware file. The firmware file is named digicap.mav.
6. Click the Upgrade button to upgrade the DVR. The DVR will automatically reboot after
the upgrade is completed. If you do not wish to upgrade at this point, click the Cancel
button.
Figure 212 Local Upgrade Menu
177