Configuring Settings For Remote Use - Cisco IP Communicator Administration Manual

Chapter 4 Configuring the Application

Configuring Settings for Remote Use

Table 4-4 Modifications for remote use
Configuration task
Optimize for low-bandwidth
(G.729).
OL-4698-01
Depending on the VPN client that is used to connect to the network, users who
run Cisco IP Communicator remotely, or outside of the LAN, might need to
modify certain settings from the Cisco IP Communicator interface. These settings
are described in Table
Purpose
Remote users with low bandwidth
connections might experience better
audio quality using a low-bandwidth
codec. (Users might want to apply
listening and/or speaking filters when
using a low-bandwidth codec. See the
"Modifying Advanced Audio Settings"
section on page 4-14
Cisco IP Communicator Administration Guide for Cisco CallManager
Understanding Post-Installation Configuration Tasks
4-4.
for details.
Where to do it
Cisco IP Communicator
right-click menu:
Preferences > Audio >
Optimize for low
bandwidth check box.
4-17