Deploying The Application - Cisco IP Communicator Administration Manual

Deploying the Application

Deploying the Application
Note
Cisco IP Communicator Administration Guide for Cisco CallManager
3-2
Users must select and tune audio devices before using those devices with
Cisco IP Communicator. The ideal time to do this task is at first launch after
installation. Cisco IP Communicator launches the Audio Tuning Wizard at initial
startup; users must complete the wizard before Cisco IP Communicator will
launch. If the user installs a new device after start up, Cisco IP Communicator
will not recognize the device until the user relaunches the application.
Related Topics
Deploying the Application, page 3-2
•
Updating the Application, page 3-7
•
Selecting and Tuning Audio Devices, page 4-6
•
You can deploy Cisco IP Communicator using either of the following installer
packages:
CiscoIPCommunicatorSetup.exe—This executable contains the required
•
Windows Installer engines and default verbose logging for typical
deployments.
CiscoIPCommunicatorSetup.msi—This Microsoft Windows Installer
•
package (MSI package) allows you to provide deployment customization
using command line options. Logging is not automatically set when you use
the MSI package.
If users in your system have more than one network interface on their PCs or use
laptops with docking stations, be sure to read the
section on page 4-9.
See these sections for details:
Deployment Methods, page 3-3
•
Customizing Deployment with Command Line Options, page 3-5
•
Chapter 3 Deploying and Updating Cisco IP Communicator
"Selecting a Device Name"
OL-4698-01