Configuring A Custom Phone Ring - Cisco IP Communicator Administration Manual

Creating Custom Phone Rings

Configuring a Custom Phone Ring

Step 1
Step 2
Step 3
Step 4
Step 5
Cisco IP Communicator Administration Guide for Cisco CallManager
6-4
Related Topics
RingList.xml File Format Requirements, page 6-2
•
Configuring a Custom Phone Ring, page 6-4
•
To create custom phone rings, follow these steps:
Procedure
Create a PCM file for each custom ring (one ring per file). Ensure the PCM files
comply with the format guidelines that are listed in the
for Custom Ring Types" section on page
Place the new PCM files that you created in the C:\Program Files\Cisco\
TFTPPath directory on the Cisco TFTP server for each Cisco CallManager in
your cluster.
Use an text editor to edit the RingList.xml file. See the
Requirements" section on page 6-2
and for a sample RingList.xml file.
Save your modifications and close the RingList.xml file.
To cache the new RingList.xml file, stop and start the TFTP service by using
Cisco CallManager Serviceability or disable and re-enable the "Enable Caching
of Constant and Bin Files at Startup" TFTP service parameter (located in the
Advanced Service Parameters).
Related Topics
RingList.xml File Format Requirements, page 6-2
•
• PCM File Requirements for Custom Ring Types, page 6-3
Chapter 6 Customizing Cisco IP Communicator
"PCM File Requirements
6-3.
"RingList.xml File Format
for information about how to format this file
OL-4698-01