Cisco IP Communicator Administration Manual page 47

Chapter 2 Preparing to Deploy Cisco IP Communicator
Table 2-2 Pre-Deployment and Configuration Checklist (continued)
Task
Set up a web site or use
2.
another method to tell users
how to: install and configure
the application, obtain user
documentation, and access
the User Options web pages.
Install audio devices on each
3.
client PC or provide
installation information to
users.
Configure, or help users
4.
configure, the installed
application as necessary.
OL-4698-01
Notes
Recommended. Providing
users with this information can
improve their success with the
product.
You or the user will need to
install audio devices that rely
on drivers such as a USB
headset and USB handset.
Ideally, this task should be
performed before the
application is installed on the
client PC.
Some configuration tasks may
be required before the
application will function at
initial startup.
Related Topics
Adding Devices to the Cisco CallManager Database, page 2-10
•
Deploying the Application, page 3-2
•
Updating the Application, page 3-7
•
An Overview of Post-Installation Configuration Tasks, page 4-2
•
Cisco IP Communicator Administration Guide for Cisco CallManager
Deployment and Configuration Checklist
For details, see...
Providing Information to Users Via
a Website, page A-1
Installing Headsets and Other
•
Audio Devices, page 3-1
Selecting and Tuning Audio
•
Devices, page 4-6
Configuring the Application,
page 4-1
2-9