Adding Users To Cisco Callmanager - Cisco IP Communicator Administration Manual

Chapter 5 Configuring Features and Services

Adding Users to Cisco CallManager

OL-4698-01
After you configure these services, verify that your users have access to the User
Options web pages, from which they can select and subscribe to configured
services. See the "Helping Users Subscribe to Services and Configure Features"
section on page A-3 for a summary of the information that you must provide to
end users.
Related Topics
Telephony Features Available for Cisco IP Communicator, page 5-2
•
Configuring Corporate and Personal Directories, page 5-5
•
Configuring Softkey Templates, page 5-15
•
Adding Users to Cisco CallManager, page 5-17
•
• Disabling Local Settings Access, page 5-18
Adding users to Cisco CallManager Administration allows you to display and
maintain information about users and allows each user to perform the following
actions:
Access the corporate directory and other customized directories from
•
Cisco IP Communicator
Create a personal directory (Personal Address Book service)
•
Set up speed dial and call forwarding numbers
•
Subscribe to services that are accessible from a Cisco IP Communicator
•
You can add users to Cisco CallManager using either of these methods:
To add users individually, choose User >Add a New User from the
•
Cisco CallManager Administration web application.
Refer to Cisco CallManager Administration Guide for more information
about adding users. Refer to Cisco CallManager System Guide for details
about user information.
To add users in batches, use the Bulk Administration Tool. This method also
•
enables you to set an identical default password for all users.
Refer to Bulk Administration Tool User Guide for Cisco CallManager for
details.
Cisco IP Communicator Administration Guide for Cisco CallManager
Adding Users to Cisco CallManager
5-17