Chapter 4 Configuring The Application - Cisco IP Communicator Administration Manual

Configuring the Application
Cisco IP Communicator requires some configuration after installation and before
first use. At the very least, users must select and tune audio devices with the
Audio Tuning Wizard. (Users might need to complete additional configuration
tasks during startup for Cisco IP Communicator to work properly.)
If any users rely on unsupported VPN clients, you must run the
Cisco IP Communicator Administration Tool and enable HTTP access, if you
have not done so already.
Additionally, if your company uses Cisco IP Communicator in an environment
where users do not have administrative privileges, and if multiple users share a
PC, you must run Cisco IP Communicator one time after installation using an
administrator account on each machine and select a network interface and TFTP
server, if required. Those settings will remain with the PC; all other settings in this
environment will follow the user.
This chapter covers the following sections:
•
•
•
OL-4698-01
An Overview of Post-Installation Configuration Tasks, page 4-2
Understanding Post-Installation Configuration Tasks, page 4-6
Helping Users with Post-Installation Configuration Tasks, page 4-19
Cisco IP Communicator Administration Guide for Cisco CallManager
C H A P T E R
4
4-1