Accessing The Web Page For A Device - Cisco IP Communicator Administration Manual

Viewing Operational Information Remotely from a Web Page

Accessing the Web Page for a Device

Step 1
Step 2
Tip
Cisco IP Communicator Administration Guide for Cisco CallManager
7-10
For more information about troubleshooting the Cisco IP Communicator, see
Chapter 8, "Troubleshooting Cisco IP Communicator."
This section includes these topics:
Accessing the Web Page for a Device, page 7-10
•
Viewing Device Information Remotely, page 7-11
•
Viewing Network Configuration Remotely, page 7-11
•
Viewing Device Logs Remotely, page 7-13
•
Viewing Streaming Statistics Remotely, page 7-15
•
To access the web page for a Cisco IP Communicator, follow these steps:
Procedure
Search for the device in Cisco CallManager by choosing Device > Phone.
Devices registered with Cisco CallManager display the IP address at the top of the
Phone Configuration web page.
Open a web browser and enter the following URL, where IP_address is the IP
address of the Cisco IP Communicator:
http://IP_address
If you are doing this on the PC on which Cisco IP Communicator is installed, you
can use localhost for the IP address if Cisco IP Communicator is running.
Chapter 7 Viewing Operational Information
OL-4698-01