Cisco IP Communicator Administration Manual page 73

Chapter 4 Configuring the Application
Table 4-2 Recommended or optional post-installation configuration tasks
Task
Modify advanced
audio properties
Specify
low-bandwidth
setting for remote
use
Configure a custom
audio port range
OL-4698-01
Required?
Optional; used to
improve sound quality.
Recommended for
advanced users.
Optional. Remote users
with low bandwidth
connections might
experience better audio
quality using a
low-bandwidth codec.
Optional. You might
use this option if you
want to open up a single
port to pass audio
through a firewall or
want to apply a QoS
policy using a restricted
range of RTP ports.
Related Topics
Understanding Post-Installation Configuration Tasks, page 4-6
•
Helping Users with Post-Installation Configuration Tasks, page 4-19
•
Customizing Cisco IP Communicator, page 6-1
•
Troubleshooting Cisco IP Communicator, page 8-1
•
Cisco IP Communicator Administration Guide for Cisco CallManager
An Overview of Post-Installation Configuration Tasks
Who configures where?
Cisco IP Communicator
right-click menu:
Preferences > Audio >
Advanced.
Cisco IP Communicator
right-click menu:
Preferences > Audio.
Cisco IP Communicator
right-click menu:
Preferences > Audio >
Network...
Or, from Cisco CallManager
Administration: Phone
Configuration > Product
Specific Configuration.
Note that local configuration
takes precedent over
configuration done from
Cisco CallManager.
For details, see...
Configuring Settings for
Remote Use, page 4-17
Configuring Settings for
Remote Use, page 4-17
Selecting an Audio Port
Range, page 4-16
4-5