Moving An Object; Rotating An Object - Canon imagePrograf iPF9400 User Manual

Moving an Object (Mac OS X)
Resizing by specifying a scaling value
1
Select an object.
2
Open the Format Dialog Box
3
Use Scaling to set the magnification for enlargement or reduction. You either enter numbers directly.
•
•
Note
4
Click the OK button.

Moving an Object

Moving an Object

You can move the object position.
1
Select an object.
2
Place the pointer inside the selection box of the object
to show the crosshair handle, and drag it to move the
object.

Rotating an Object

Rotating an Object

You can rotate the object.
1
Select an object.
2
Select Rotate Left or Rotate Right from the toolbar.
Alternatively, you may click on the Rotate check box in
the Format Dialog Box
Right or Rotate Left, and click the OK button.
•
When several objects are selected, you cannot select Rotate.
436
Note
.
→P.433
You can input between 25 and 400.
You can change the numbers by clicking either ▲ button or ▼ button.
then select Rotate
→P.433
iPF9400
User's Guide