Canon imagePrograf iPF9400 User Manual page 663

iPF9400
First Level
Print Job Log
Pause Print
HDD Information
*1: If a pending job is selected, Print Anyway is displayed.
Set./Adj. Menu
Limited items are displayed during printing. The displayed items are indicated by annotations.
First Level Second Level
Nozzle Check ┋ Status Print ┋ Interface Print ┋ Paper Details ┋ Print Job Log ┋ Menu Map
Test Print
Adjust Printer Head Posi. Adj.
Feed Priority
Calibration
Maintenance Head Cleaning
Nozzle Check
Replace
P.head
Repl. maint cart
Head Info
Repl. S. Cleaner
Change Cutter
Interface Setup EOP Timer ( *8 )
( *8 )
TCP/IP ( *8 )
User's Guide
Second Level
Off *┋ On
Total capacity ┋ Box free space
Third Level
Standard
Simple
Initial adjustmt ┋ Manual ( *1 )
Other
Automatic *┋ Print Quality ┋ Print Length
Adj. Priority
Auto(GenuinePpr) ┋ Auto(OtherPaper) ┋ Manual
Adj. Quality ( *2 )
Adjust Length Adjustment-
( *3 ) Print
Change Set-
tings
Auto Adjust
Date ┋ Paper Type ┋ Adjustment Type
Calibration Log
Disabled ┋ Enabled *
Use Adj. Value
Set Exec. Off *┋ On
Guide
Return Defaults
Head Cleaning A ┋ Head Cleaning B
Printhead L ┋ Printhead R ┋ L & R Printheads
ProductName: ┋ s/n: ┋ Days elapsed: ┋ Count [Mdot]:
Printhead L
ProductName: ┋ s/n: ┋ Days elapsed: ┋ Count [Mdot]:
Printhead R
10 sec. ┋ 30 sec. ┋ 1 min. ┋ 2 min. ┋ 5 min. ┋ 10 min. *┋ 30 min. ┋ 60 min.
IPv4 ( *8 ) IPv4 Mode ( *8 )
Protocol ( *4 )
( *8 )
IPv4 Settings
DNS Settings
( *9 )
Third Level Fourth Level
Fourth Level Fifth Level
A:High ┋ B:Standard/Draft
A:High ┋ B:Standard/Draft
Automatic ┋ Manual *
DHCP ( *8 )
BOOTP ( *8 )
RARP ( *8 )
IP Address ( *9 )
Subnet Mask
( *9 )
Default G/W ( *9 )
DNS Dync up-
date ( *9 )
Pri. DNS SrvAddr ( *9 )
Sec. DNS SrvAddr ( *9 )
Menu Structure
Fifth Level
Sixth Level Seventh Level
On ┋ Off *
On ┋ Off *
On ┋ Off *
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
On ┋ Off *
663