Canon imagePrograf iPF9400 User Manual page 580

Removing Printed Documents from the Media Take-up Unit
5
Press ▲ or ▼ to select Yes. As you hold the trailing edge of the printed document, press the OK button.
The roll is now cut.
Important
6
Hold the trailing edge of the printed document and
press the ▼ button on the Media Take-up Unit to re-
wind the printed document.
Apply adhesive tape to the rewound paper to hold it in
place, if necessary.
Important
7
Turn off the Media Take-up Unit by pushing in the Re-
wind Mode Switch.
580
•
Always hold the trailing edge of printed documents when cutting rolls. If you do not hold the documents, they may
fall on the floor and the printed surface may become soiled.
•
Be careful not to scratch the printed surface.
iPF9400
User's Guide