Cannot Load Sheets; Paper Is Not Cut Straight; Paper Is Not Cut; The Media Take-Up Unit Continues Rotating - Canon imagePrograf iPF9400 User Manual

Cannot load sheets

Cause
The paper source selection is incorrect.
Cannot load sheets
Cannot load sheets
Cause
The paper source selection is incorrect.

Paper is not cut straight

Paper is not cut straight
The paper is bent or curled at the cut position.
Paper rises by the ends of the cut position before it is
cut.
You are using paper that cannot be cut with the Cutter
Unit.
The Cutter Unit is not installed correctly.
The Cutter Unit blade is worn out.
Cut Speed is not configured correctly in the Control
Panel menu.
During cutting, printed documents fall out at an angle.

Paper is not cut

Paper is not cut
In the printer driver, No or Print Cut Guide-
line is specified in Automatic Cutting.
In the Control Panel menu, Cutting Mode is
set to Eject or Manual.
The Cutter Unit is not installed.
Rolls are not cut when you are using the Me-
dia Take-up Unit.

The media take-up unit continues rotating

The media take-up unit continues rotating
There is a foreign object in the path of the Media Take-up Sensor (indicated by a
dotted line).
884
Press the Load button and select the paper source.
Press the Load button and select the paper source.
Cause
Cause
Specify Yes in Automatic Cutting in the printer driver.
(See "Page Setup Sheet (Windows).")
(See "Paper Detailed Settings Dialog Box (Mac OS X).")
If the Cutting Mode is Eject, press the Cut button to cut the paper.
If the Cutting Mode is Manual, cut rolls with scissors or the like.
(See "Specifying the Cutting Method for Rolls.")
Install the Cutter Unit.
(See "Replacing the Cutter Unit.")
Either cut the roll paper by pressing the Cut button or lift the Release Lever and cut the roll with
scissors.
(See "Removing Printed Documents from the Media Take-up Unit.")
Cause
Corrective Action
Corrective Action
Straighten out any curling by the edges of the paper.
Reload the paper correctly.
Specify Manual in Cutting Mode in the Control Panel menu and use scissors or a
cutting tool to cut the roll after printing.
(See "Specifying the Cutting Method for Rolls.")
Reinstall the Cutter Unit correctly.
(See "Replacing the Cutter Unit.")
Replace the Cutter Unit.
(See "Replacing the Cutter Unit.")
Change the Cut Speed setting in the Control Panel menu.
(See "Menu Structure.")
→P.661
In the Control Panel menu, set Cutting Mode to Eject. Hold documents after printing,
as they are cut.
(See "Specifying the Cutting Method for Rolls.")
Corrective Action
→P.195
→P.848
Remove the foreign object from the Media Take-up Sensor
path. Arrange the Basket Cloth and Basket Rod so they do
not interfere with the Media Take-up Sensor.
Corrective Action
→P.546
→P.848
→P.848
→P.546
→P.368
→P.546
→P.579
Corrective Action
iPF9400
User's Guide