Resizing Originals To Fit The Roll Width - Canon imagePrograf iPF9400 User Manual

Resizing Originals to Fit the Roll Width

11
Make sure the width of the loaded roll is displayed in the
(420.0mm).
•
Note
12
Make sure
shows the original size as specified in
the Page Attributes dialog box—in this case, ISO A4.
13
D
Select the
14
Make sure
15
Click ISO A3 in the
16
Confirm the print settings, and then click
•
Note
Resizing Originals to Fit the Roll Width
Resizing Originals to Fit the Roll Width
You can freely adjust the size of originals by enlarging or reducing them as desired.
• Enlarged/Reduced Printing
Enlarge or reduce the original in the printer driver, as desired.
72
If the width of the roll loaded in the printer is not shown in
B L
Roll Width, click Printer Information on the Main
pane to update the printer information.
C
Page Size on the Page Setup pane
Enlarged/Reduced Printing check box.
E
Fit Paper Size is selected.
I
Paper Size list.
For tips on confirming print settings, see " Confirming Print Settings
B
Roll Width list—in this case, ISO A2/A3
C
Paper Size in
M
Print to start printing.
"
→P.362
iPF9400
User's Guide