Other Maintenance; Preparing To Transfer The Printer - Canon imagePrograf iPF9400 User Manual

iPF9400

Other Maintenance

Other Maintenance

Preparing to Transfer the Printer ........................................................................................................................ 865

Updating the Firmware ....................................................................................................................................... 871
Preparing to Transfer the Printer Preparing to Transfer the Printer
To protect the internal parts in transit, always follow these steps before transferring the printer to a new location.
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
•
Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may leak and damage the printer if
you do not prepare the printer correctly and it is tipped or stood on end in transit.
Important
•
Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer (that is, when
you execute the printer menu item to prepare for transfer).
Note
•
Ink must be drawn into the Maintenance Cartridge before Level 2 or Level 3 printer transfer, as described in the following
table. Prepare the Maintenance Cartridge in advance.
•
Always follow the instructions of the service representative when transferring the printer under Level 3 conditions.
Shipping Method
Level
(Example)
1 By truck
2 By plane
User's Guide
Permitted Angle of Inclination
Lengthwise: 0–30º
Rotation: 0–10º
All directions: 0–30º
Preparing to Transfer the Printer
Required
Amount of Ink Mainte-
to Dispose of nance Car-
tridges( *1 )
0 0( *2 )
Approx. 600 1 or 2
ml (20.3 fl
oz)
865