Canon imagePrograf iPF9400 User Manual page 869

iPF9400
6
Close the Ink Tank Cover.
At this point, ink is drawn out from inside the tubes.
•
Do not remove the Maintenance Cartridge except when the message for replacing it is displayed.
If you remove the Maintenance Cartridge while ink is being drawn out, the ink may leak out.
Important
7
When the process is finished, "Preparations for moving the printer finished. Turn the power off" is dis-
played.
When this happens, replace the Maintenance Cartridge currently being used with a new Maintenance Car-
tridge.
8
Press the Power button and turn off the printer.
Pack the printer
1
Disconnect the printer power cord and interface cable, as well as the Media Take-up Unit Power Inlet.
•
Turn the power off and then disconnect the power cord. It may damage the printer if you unplug it before it is off and
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and follow this
Important
procedure again.
2
Open the Top Cover and lift the Ejection Guide.
User's Guide
Preparing to Transfer the Printer
869