Canon imagePrograf iPF9400 User Manual page 866

Preparing to Transfer the Printer
Level
3
*1: This is the number of new Maintenance Cartridge required when you execute the Prep.MovePrinter menu. The num-
ber varies depending on the amount remaining in the Maintenance Cartridge being used.
*2: If a message instructing you to replace the Maintenance Cartridge is displayed on the Display Screen, the Maintenance
Cartridge needs to be replaced.
Remove paper
1
Remove the paper.
• Rolls (See "Removing the Roll from the Printer.")
Sheets (See "Removing Sheets.")
•
Access the Prep.MovePrinter menu
1
If a message instructing you to replace the Maintenance Cartridge is displayed on the Display Screen, replace
the Maintenance Cartridge.
(See "Replacing the Maintenance Cartridge.")
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
•
Note
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Prep.MovePrinter, and then press the OK button.
5
Press ▲ or ▼ to select the level of transfer, and then press the OK button.
6
Press ▲ or ▼ to select Execute, and then press the OK button to display the confirmation screen.
7
Press ▲ or ▼ to select Yes, and then press the OK button.
The printer is now prepared for transfer.
• Level 1
866
Once preparations are finished, a message on the Display Screen requests you to turn off the printer.
Turn off and pack the printer. There is no need to remove the ink tanks.
(See "Pack the printer.")
• Level 2 and Level 3
Shipping Method
(Example)
Tipping the Lengthwise: 0–90º
printer or Rotation: 0–30º
holding it up-
right for eleva-
tors or stairs
).
If the Tab Selection screen is not displayed, press the Menu button.
→P.869
Permitted Angle of Inclination
→P.539
→P.560
→P.852
iPF9400
Required
Amount of Ink Mainte-
to Dispose of nance Car-
tridges( *1 )
Approx. 2 or 3
1,900 ml
(64.3 fl oz)
User's Guide