Canon imagePrograf iPF9400 User Manual page 566

Hide thumbs Also See for imagePrograf iPF9400:
Table of Contents

Advertisement

Using the Output Stacker
When using the stacker for ejection in front, always select Cutting Mode > Eject. Selecting Automatic may damage printed
documents. (See "Specifying the Cutting Method for Rolls.")
Important
During ejection in the front of the printer, be especially careful when using delicate paper or paper that curls easily.
Depending on the type of paper, the edge may curl or bend during ejection. In this case, straighten out the paper. If the paper
is curled or bent, it may damage printed documents.
Some types of paper may get caught between the Ejection Guide and Output Stacker during ejection. In this case, free the
paper from where it is caught. If the paper is caught, it may damage printed documents.
1
Lift the Basket Rod gently to release the lock, lower the
stacker toward the front, and push it back.
2
Remove the Output Stacker from the printer.
Remove the front Basket Rod from the left and right
basket arms, and remove the back Basket Rod and
black cord from the Rod Holder.
566
→P.546
iPF9400
User's Guide

Advertisement

Table of Contents
loading

Table of Contents