Canon imagePrograf iPF9400 User Manual page 97

iPF9400
4
Make sure the Main sheet is displayed.
5
A
In the Media Type list, select the type of paper that is loaded. In this case, click Canon Heavyweight Coat-
ed Paper.
6
Select the print target in the
•
When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit touches
printing surfaces that are not dry yet, it may damage the paper or the edge of the document that is cut, depending
Important
on frequency of use. In this kind of situation, change the ink drying time using the following procedure.
•
Click Advanced Settings in Media Type.
•
Select an ink drying time in the list for the Between Pages setting of Drying Time.
7
Click the Page Setup tab to display the Page Setup
sheet.
8
A
In the Page Size list, click the size of the original as specified in the application. In this case, click 10"x12".
9
Select and click a roll paper in the
User's Guide
Borderless Printing by Resizing Originals to Match the Paper Size (Windows)
E
Print Target list.
L
Paper Source list.
97