Frequently Asked Questions - Canon imagePrograf iPF9400 User Manual

Frequently Asked Questions

Frequently Asked Questions

Frequently Asked Questions
Frequently Asked Questions
Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the hyper-
links in the answer column.
Question
I want to easily create ver-
tical or horizontal banners.
Does this printer support
sub-ink tank system?
I want to know how to con-
figure roll cutting.
I want to configure so that
the roll is cut automatically
after waiting for the ink to
dry.
How do I print without bor-
ders?
I want to know the paper
types that can be used in
this printer.
The paper type that I want
to print is not displayed on
the Display Screen.
What type of function is
color calibration?
Can I perform duplex
printing?
876
I want to perform enlarge-
ment printing.
You can print originals that are in landscape (or portrait) orientation automatically enlarged to fit the roll width. This
is an easy way to create vertical or horizontal banners.
(See "Printing Vertical or Horizontal Banners (Large-Format Printing).")
This printer supports sub-ink tank system.
Even if an ink tank becomes empty during printing, since a certain amount of ink always is stored in a sub-ink
tank, you can replace the ink tank while printing.
(See "Replacing Ink Tanks.")
→P.826
You can select the cutting method by the setting of the printer driver and the setting of the printer.
To cut rolls automatically after printing, set Cutting Mode of the printer to Automatic and Automatic Cutting of
the printer driver to Yes.
When using paper for which ink adhesion takes time or the print surface is easily scratched, we recommend that
you set the Cutting Mode setting of the printer to Eject.
(See "Specifying the Cutting Method for Rolls.")
(See "Cutting Roll Paper After Printing.")
In the printer driver, you can set the time for waiting until the ink dries.
Also, you can set likewise on the printer.
(See "Specifying the Ink Drying Time for Rolls.")
(See "Menu Structure.")
→P.661
When printing on rolls, you can perform borderless printing by configuring the printer driver. (when printing on cut
sheets, you cannot perform borderless printing)
(See "Borderless Printing on Paper of Equivalent Size.")
(See "Borderless Printing by Resizing Originals to Fit the Roll Width.")
(See "Borderless Printing at Actual Size.")
Concerning the paper that can be used in this printer, refer to the imagePROGRAF home page or the Paper Ref-
erence Guide.
(See "Types of Paper.")
→P.522
When using newly released paper, paper information must be registered on the printer and the printer driver.
Download the new version of Media Information File from the imagePROGRAF website and install it.
(See "Types of Paper.")
→P.522
Color calibration improves color consistency by compensating for slight differences in how color appears when
printing due to individual variations or aging among the printers.
We recommend color calibration in the following situations.
•
After initial printer installation
•
After Printhead replacement
•
When you sense a change of color compared to previously
•
To print with colors aligned from multiple printers
•
When the execution guide is displayed
(See "Corrects slight differences in how colors appear (color calibration).")
This printer cannot perform duplex printing.
If you use the Folded Duplex function in the Free Layout of Windows software, you can print two pages one-
sided, fold them at the center and suspend them to substitute for duplex printing.
(See "Prints using Folded Duplex (Windows).")
With the printer driver, you can specify the ratio matching the document with the paper size and width and perform
enlargement printing or reduction printing.
(See "Resizing Originals to Match the Paper Size.")
Answer
→P.108
→P.546
→P.167
→P.544
→P.95
→P.101
→P.89
→P.820
→P.239
→P.68
iPF9400
User's Guide