Changing The Object Size; Moving An Object - Canon imagePROGRAF iPF685 User Manual

Changing the Object Size

•
To select an object, click that object.
•
Note
To select multiple successive objects, click them while holding down the Shift key.
•
To select multiple arbitrary objects, click them while holding down the Ctrl key.
•
To select all objects, select Select All from the Edit menu.
•
When you specify the area with dragging the mouse, the object in the area is selected.
Changing the Object Size Changing the Object Size
You can change the object size by means of mouse operation or by specifying a scaling value.
•
The vertical-to-horizontal ratio remains unchanged when the object is enlarged or reduced.
Note
Resizing by means of mouse operation
1
Select an object.
2
Place the pointer at a corner of the selection box
around the object to show the arrow handle, and drag
this handle to change the object size.
Resizing by specifying a scaling value
1
Select an object.
Click on the Enl./Red. checkbox in the Format Dialog Box
2
You either enter numbers directly.
Note
194
3
Click the OK button.

Moving an Object

Moving an Object
You can move the object position.
1
Select an object.
•
You can input between 25 and 600.
•
You can change the numbers by clicking either ▲ button or ▼ button.
and select Scaling.
P.188
➔
iPF685
User's Guide