Mobile Broadband Information And Settings - Sierra Wireless 4G LTE Tri-Fi Hotspot User Manual

● Scan for 4G button (available only if 4G is in power save mode — the LCD of the device
displays "Power Save Mode. 4G Network not found"). Click this button to search for and
attempt to connect to a 4G network. (Whether or not a connection to 4G occurs depends
on the WAN Mode setting; see
Tip: If 4G is in power save mode, you can also scan for 4G from the "Network Status" LCD
information screen. (See
See also Improving Signal

Mobile Broadband Information and Settings

The 3G or 4G icon indicates the service and connection state. Note that only one icon is shown
(the active network).
Icon Description
You have no service. Try the suggestions in
or
Network.
This image cannot currently be displayed.
You have service but are not connected.
or
You have service and are connected.
or
The text next to the icon displays the connection status, for example, "No service," or
"Connected."
Click the icon to display the Mobile Broadband Information window. The window displays:
● The active network — the network that is currently being used for your data connection.
For example, "4G", "4G LTE", or "3G (EVDO Rev A)."
● 3G and 4G status. For example, "Connected."
● Connection Preferences (if you're logged in).
Configuring the 3G/4G Connection Preferences
The value determines which network(s) to connect to, and in what order:
● 3G Preferred — Connection can be established to either 3G or 4G; if both are available,
3G is used.
● 4G Preferred — Connection can be established to either 3G or 4G; if both are available,
4G is used. This setting is recommended if your service provider has no data limit for 4G
and 4G LTE, but does for 3G, or you want to take advantage of the faster data transfer
speeds of 4G/4G LTE.
Browser Interface Home Page
WAN Tab: Setup
LCD Information
Strength.
51
Panel.)
Screens.)
Cannot Connect to the 3G or 4G