Table of Contents
Advertisement
Rev 2 Jan.13
To unblock a device, giving it access to your network:
1. From the Unite Manager homepage, click Wi-Fi > Mac Filtering. The Black
List shows all blocked devices. (Note: The Black List appears and is active
only if MAC Filter Mode is set to Black List.)
2. Click
beside the device you want to unblock.
Configure mobile broadband
Set auto connect options
By default, the mobile hotspot automatically connects to AT&T's mobile
broadband network. You can change this feature so that the mobile hotspot
automatically connects to another network when you are roaming, or to never
auto connect.
On the LCD touchscreen:
1. On the home screen, tap Settings > Mobile Broadband.
2. Select the desired Auto Connect option:
· Always except when roaming — The mobile hotspot automatically attempts
to connect only to your network provider's mobile broadband network when
powered on.
· Always — The mobile hotspot automatically attempts to connect to the
mobile broadband network when powered on. You may incur additional
roaming charges if you are outside of your network provider's coverage
area.
· Never (connect manually each use) — The mobile hotspot will not attempt to
automatically connect to the mobile broadband network when powered on.
To connect to the network manually, view the Mobile Broadband Discon-
nected alert and click Connect, or select Settings > Mobile Broadband >
Status and click Connect.
Use Your Mobile Hotspot
27
Advertisement
Table of Contents
