Device Tab: About Panel - Sierra Wireless 4G LTE Tri-Fi Hotspot User Manual

Device Tab: About Panel

View information about your device.
1. Log in to the home page.
2. Click Advanced settings (
3. Click Device > About.
Note: 4G and 4G LTE information is not available if WAN Mode is "3G Only." (WAN Mode is
in Advanced settings > WAN > Setup.)
The following information is displayed:
● Model Number — This is the manufacturer's model of your device.
● Network Operator — This field shows the carrier that your device was activated with.
● Manufacturer — This is the company that made your device.
● Wi-Fi Firmware Version — This is the firmware version for the Wi-Fi access point of the
device.
● Software Version — This is the firmware version for the routing hardware of the device.
● Router PRI Version — This is the PRI version for the routing hardware of the device.
The PRI (Product Release Instructions) is a file that contains the settings used to
configure wireless products for a particular service provider, customer, or purpose.
● Wi-Fi MAC Address — This is the MAC address of the 4G module. Each wireless
device has a unique MAC address (assigned by its manufacturer).
● Activation — This field reflects whether 3G is activated.
● Reconditioned — This field indicates whether your device has been returned for service
or repair and reconditioned (if applicable).
● Total Bytes — This is the amount of data transferred over the 3G network during the
lifetime of the device.
● MDN (Mobile Directory Number) — This is a 10-digit phone number.
● ESN or MEID (3G).
The ESN (Electronic Serial Number) is the unique first-generation serial number
assigned to the 3G component of the device.
Device Settings
).
79