5. In the Software Update Available alert window, click Update Options.
6. Read the information in the Software Installation Options window.
7. To install the update, click Download and install now.
— or —
If you are not in a strong signal area, make a note of the URL displayed in the window
and click I'll get the update later. At a later time, access the URL to download the
update to your computer, and then follow the steps in
When the installation is complete, reconnect to Wi-Fi. (See
Viewing Device Information
View information about your device and lifetime data usage.
1. Log in to the home page.
2. Click Advanced settings (
3. Click Device > About.
Note: 4G and 4G LTE information is not available if WAN Mode is "3G Only." (WAN Mode is
in Advanced settings > WAN > Setup.)
The following information is displayed:
● Model Number — This is the manufacturer's model of your device.
● Network Operator — This field shows the carrier that your device was activated with.
● Manufacturer — This is the company that made your device.
● Wi-Fi Firmware Version — This is the firmware version for the Wi-Fi access point of the
device.
● Software Version — This is the firmware version for the routing hardware of the device.
● Router PRI Version — This is the PRI version for the routing hardware of the device.
The PRI (Product Release Instructions) is a file that contains the settings used to
configure wireless products for a particular service provider, customer, or purpose.
● Wi-Fi MAC Address — This is the MAC address of the 4G module. Each wireless
device has a unique MAC address (assigned by its manufacturer).
● Activation — This field reflects whether 3G is activated.
Browser Interface Home Page
How Do I Connect to
).
63
Upgrading Firmware From a
Wi-Fi?)
File.