Internet Connection Information - Sierra Wireless 4G LTE Tri-Fi Hotspot User Manual

Standby (Low Power) Mode
When the device is in standby (low power) mode, the 3G/4G modem radios, the Wi-Fi radio,
and the LCD are off, and the power button
When you're logged in, you can set how soon the device goes into standby mode when no
Wi-Fi users are connected to it (Standby Timer).
You can specify different settings for battery power and AC power. (See
Panel.)
Note: This setting has no effect when the device is connected to a computer through the
micro-USB cable.
To exit standby mode:
► Connect the device to the AC charger or computer through the micro-USB cable.
— or —
Press the power button

Internet Connection Information

Click the data icon to display the Internet Connection Information window.
Note: Data usage amounts are approximate and should not be used for billing purposes. For
accurate data usage amounts, check with Sprint or click the check carrier usage link.
When you click
● Data statistics for the current connection session:

Data sent

Session duration

Data received

Total transferred
● WWAN IP Address — This is the external IP address of the modem [3G or 4G] (that is,
the IP address of the modem as seen from the Internet).
● More info — Click this link to display, when you're connected to the network, the
following information:

WAN DNS Primary — This is the address of the Internet system used to translate
names (for example, sprint.com) into IP addresses.
Browser Interface Home Page
.
the Internet Connection Information window displays:
is flashing (approximately every 8 seconds).
57
Device Tab: Basic